Deep-Hole Peck Cycle Calculator
Deep-hole peck drilling trades cutting time for chip control. The live calculator estimates programmed depth, peck count and retract overhead.
deep hole peck cycle calculator deep hole peck cycle calculator retract G83 cycle time calculator
Programmed depth
Z = H + Lp
Drill point allowance
Lp = (D / 2) / tan(point_angle / 2)
Peck count
Np = ceil(Z / Q)
Related pages
- Dovetail calculator - male and female over-pin or between-pin inspection.
- Peck drilling calculator - peck count, programmed depth and retract overhead.
- Tap drill size calculator - thread engagement and tap-drill diameter.
- Countersink depth calculator - diameter and depth geometry for chamfers.