Wood Glue Consumption Calculator

Inputs

View results
Net glue-line or panel face area before multiplying by coated faces. Use the actual contact area that receives adhesive.
ft²
Manufacturer or shop spread rate before waste, coated-face count and stock-condition allowance.
ft²/gal
Use 1 for one-side spreading over the entered bonding area, or 2 if both mating faces are coated.
Practical allowance for surface texture, open grain, end grain, face layups and squeeze-out.
Extra allowance for squeeze-out, roller or brush loss, mixing/setup loss, touch-up and uneven wet-out.
%
Usable adhesive volume per bottle, quart, gallon, pail or liter container.
gal
Material price for one adhesive container before tax, freight, labor or disposable supplies.
$/container

Results

Default result
Edit inputs
Glue needed(V_need)
0.115gal
Pass

includes coated faces, stock-condition factor and waste

Also computed

Containers to buy(N_can)Pass1containers

rounded up to whole purchase containers

Glue material cost(Cost)12.00$

Effective spread rate(A/V_eff)Pass200ft²/gal

label spread rate divided by the usage factor

Total spread area(A_spread)20ft²

Purchased volume(V_buy)0.25gal

Leftover after rounding(V_left)0.135gal

purchased volume minus estimated glue needed

Wood glue takeoff preview: 1 containers, 0.11 gallons neededWood glue takeoffVolume, containers, leftover and effective spread rate for the entered bonding area.Bonding areacontainers1needed0.11 galEffective spread200 ft2/galLeftover after rounding0.14 galMaterial cost$12.00
Method notes 3 notes
  • Glue needed = bonding area x coated faces / spread rate x usage factor x (1 + waste/100).
  • Effective spread uses the entered label spread rate and the Dressed edge joint allowance.
  • This is an adhesive takeoff only. Actual use depends on product chemistry, stock porosity, moisture, open time, roller or brush loss, clamping pressure, squeeze-out, press method and cleanup.

Powered by MachineCalcs ↗